Technical Specification

Product description

The trainer uses electronically controlled gasoline engine with automatic transmission. It can truly show the structure and work process of the gasoline engine and automatic transmission. It can be applied to the automotive engine construction and maintenance training in vocational and technical schools and automotive training institutions. It can also meet the needs of teaching in the structure of the electronically controlled gasoline engine, the working principle, and the fault setting and diagnosis.

Structure and composition

electronically controlled gasoline engine assembly, engine control unit, automatic transmission assembly, automatic transmission control unit, the combination of instruments, battery, power switch, fuel tank, throttle device, diagnostic seat, fuel pressure gauge, fault set and troubleshooting systems, mobile stand, high-definition computer inkjet color principle figure panel.

Features

1. Real running electronically controlled gasoline engine with automatic transmission;

2. It can truly show the structure and the working process of the gasoline engine.

3. The pressure gauge installed on the laboratory bench panel shows the fuel gauge

4. The digital meter shows the voltage change of each sensor.

5. The injector pulse and a throttle opening degree of change value are displayed clearly by the LED lamps.

6. Bench panel contains complete electronic control system schematics and detection terminal. Various sensors, actuators, and other signal parameters, voltage, resistance, frequency, etc. can be detected by instruments

8. The panel is equipped with a combination of instruments, speedometer and the main oil pressure gauge, which fully demonstrates the value of speed change, automatic transmission stalls and the main oil gallery pressure change value.

9.  Light-emitting diodes installed on the panel is used to display stalls changes.

10. It can test the stall and delay of the automatic transmission.

11. Diagnostic block installed on the bench can be connected to a dedicated or universal auto decoder. And self-diagnostic functions like reading fault codes from the electronic control system, clearing fault code and reading data stream can be carried out.

12. Fault setting function: Multifunction switch, intelligent integration system or intelligent fault set appraisal system can be set according to the user optional manual to test the equipment. (Equipped with a communication interface and network interface)

13. After setting the fault, the trainees can use the dedicated instrumentation to check out the location and content of the failure through the fault troubleshooting exercises.

14. It is equipped with safety devices such as the power switch, tank guard and the output shield. (Different models can be produced according to users’ requirements)

Technical parameter:

1. Nylon casters: Diameter of 75mm, width 35mm, with locking casters to mobile devices, it can be easily moved;

2. Dimensions: 1260x850x1860mm