Educational House For Electrical Installations
Specification
The educational house for electrical installations has been designed to apply the assembling and testing techniques of electrical installations in buildings of residential, business and service sectors. This system is used to apply the installation techniques according to standards, and in particular, to the safety of electrical installations as explained in the regulations in force. This equipment emphasizes the aspects concerning electrical testing including “visual examination” without any need of “instrumental tests” for checking the installation effi ciency.
This equipment represents a small size building for residential use designed to analyze the correct assembling and testing procedures of electrical installations (“Rules for safety of electrical installations”). it is suitable to measure insulation, fault loop impedance and voltage drops, and to carry out continuity tests and checks of protection devices on already wired and operating circuits, besides enabling to carry out changes and transformations on already existing installations.
This program includes the analysis of installations such as:
Lighting and EMF distribution systems
with energy counter (kWh)
Staircase lighting system
Interphone system
Earthing and equipotential system
TV antenna system
Telephone distribution system
Gas and CO alarm system
Anti theft system
ADDITIONAL TRAINING PROGRAM THAT CAN BE IMPLEMENTED:
Video interphone system
Consumption optimization system
Automatic lighting system with sensor
Telephone system
Electric separation with isolation transformer
Home automation systems with PLC
Lighting control with intelligent BUS systems.
1 main power supply of 230 V – 16 A
1 single-phase energy meter of 230 V – 20 A
1 branch exchange with 2 differential circuit breakers and 3 magneto-thermal circuit breakers
1 antenna control unit with mixer amplifi er, 4-output divider and 7 TV sockets
1 TV antenna installed on the roof (III – IV – V band)
1 interphone power supply unit with changeover switch for excluding the outdoor unit
1 two-button interphone porter
1 electric lock
1 lighting nameplate with pushbutton
1 earth collector for connecting earthing plates and equipotential node
4 earthing connections with resistance of 1 Ω and breaking terminals
1 two-zone anti theft control unit
1 electronic self-powered siren
Wall 2 (living room and kitchen):
1 lighting system with two incandescent lamps of 230 V controlled by two pushbuttons and switch relay
2 sockets of 230 V 16 A for power consumer devices of living room
1 incandescent lamp of 230 V with controller of luminous intensity
1 telephone jack
2 TV sockets for living room
1 electronic two-tone ringer
1 chronothermostat (living area)
1 electronic smoke/heat detector
1 infrared presence detector
1 lamp of low power consumption controlled by two two-way switches
3 sockets of 230 V 16 A for electric household appliances
2 TV sockets for kitchen
1 self-powered emergency lamp of 230 V
1 wall-type interphone communicating with outdoor unit and intercommunicating with indoor unit
1 ringer of 12 V for calls from bedrooms
1 buzzer of 12 V for emergency calls from bathrooms
1 buzzer for remote gas alarm
1 gas leak detector
1 micro contact for anti theft system
Wall 3 (bedroom and bathroom):
1 incandescent lamp controlled by two two-way
switches and by an inverter
1 socket of 230 V 16 A for electric household appliances
1 single-phase socket of 230 V 10 A for lights
1 incandescent lamp of 230 V with controller of luminous intensity
1 TV socket
1 telephone jack
1 electronic two-tone ringer
1 electronic thermostat (sleeping area)
2 pushbuttons for service calls
1 halogen lamp of extra-low voltage controlled by a switch
1 pushbutton for emergency call from bathroom
1 electro-mechanical thermostat (bathrooms)
1 socket of 230 V 16 A for water heater, with magneto-thermal circuit breaker of 10 A
1 socket for electric shaver with transformer, controlled by switch
Wall 4 (study, stairwell and boiler room):
3 lamps with portable coded radio control and 2 separate dimmers
1 telephone jack
2 TV sockets
1 socket of 230 V 16 A for electric household appliances
1 single-phase socket of 230 V 10 A for lights
1 interphone communicating with outdoor unit and intercommunicating with kitchen
1 micro contact for anti theft system
3 incandescent lamps of 230 V with two LED pushbuttons and timing relay
1 microwave presence detector
1 socket of 230 V 16 a for heating control unit
3 warning lights (simulating the pumps of heated zones)
1 gas cutoff solenoid valve
